Carpet squishing underfoot, hardwood starting to cup, water creeping under the kitchen cabinets? One call routes you to an independent Loris pro with a truck-mounted extractor tonight.
Free referral call. You are connected with an independent, licensed and insured local contractor.
Extraction is the cheapest drying there is. Water pulled out with suction never has to be evaporated by a dehumidifier.
The pros we route you to run their own licensed, insured local businesses. Ask for proof of coverage on the call. You can also ask whether their technicians hold IICRC Water Restoration Technician training and work to IICRC S500 procedures.
A soaked living room at midnight is not a next-week problem. The line is answered all night, and we route you to an available contractor near you, with the arrival window confirmed before you hang up.
You see the price in writing from the contractor before any extraction starts. It should say which rooms get extracted, whether pad is being saved or pulled, and what drying equipment follows.
A rental carpet cleaner barely scratches a saturated pad. Expect a truck-mounted or high-lift portable extractor, carpet wands, a weighted or rider-style extraction tool, hardwood floor drying mats with a vacuum panel, pin and pinless moisture meters, and a thermal imaging camera.
A soaked carpet and pad can hold a surprising amount of water in every square yard. Left alone, that water wicks into the tack strip, the subfloor and the bottom inch of drywall. Thorough extraction in the first hours can cut the drying time from most of a week to a few days, and it shrinks the window mold has to get started.
The 24 to 48 hour mark is what restoration contractors watch. Clean water from a supply line (IICRC Category 1) starts turning into Category 2 as it sits and picks up dust, backing glue and whatever is in the pad. Fast extraction keeps it clean and keeps more of your flooring savable.
Each material holds water differently, so each one gets its own extraction method.
The first pass is slow, overlapping strokes with a carpet wand on a truck-mount or high-lift portable. A truck-mount pulls far stronger vacuum than a plug-in unit, but a portable reaches upper floors and high-rise units where hoses cannot run from the street.
Wands pull water out of the carpet, but the pad below holds on to most of it. Weighted or rider-style tools let the technician stand on the extraction head, compressing carpet and pad together so the vacuum draws water up out of the cushion.
Not all pad is worth saving. Clean water caught early in a single room is often saved with weighted extraction and floating the carpet on air movers. Pad soaked with gray or black water, delaminated, or wet for too long is usually pulled and bagged, then the carpet is relaid over new pad.
Cupping starts when moisture swells the underside of each board more than the face. Pros lay flat drying mats over the floor, seal the edges, and pull suction through a vacuum panel to draw water out of the boards and the gaps between them before cupping gets worse.
The space under a base cabinet is a sealed box that traps water. The contractor pulls the toe-kick panel, extracts the cavity with a narrow crevice tool, and may drill small holes in the cabinet base so injection drying hoses can push dry air inside.
Gypsum board wicks water up from the bottom edge, often a foot or more. Pulling water out of the floor quickly limits how high it climbs. The contractor maps moisture with a pinless meter and decides whether baseboard removal and drilled weep holes will do, or whether a flood cut is needed.
Call now and we route you to an extraction pro near Loris.
From first ring to extracted floors and a drying plan, here is the sequence.
We ask which rooms are wet, what the flooring is, and how long the water has been there. Carpet, hardwood, laminate and tile all change what the contractor brings, so the details help. Then we route your call to an available independent pro.
The contractor arrives with an extractor, wands, a weighted tool and moisture meters. If the source is still leaking, it gets stopped first. Furniture is moved or blocked up on foam pads so legs do not stain wet carpet.
A thermal imaging camera and moisture meters map where the water went. You get a written scope and price covering the rooms to extract, whether pad stays or goes, any hardwood mats, cabinet cavity drying, and the dehumidifiers and air movers that follow.
After extraction, LGR dehumidifiers and air movers go in to finish the drying. The contractor starts a drying log with readings in GPP and material moisture, checks back until materials reach dry standard, and signs off on the completed scope with you.
Why the rush? Water in carpet pad and subfloor keeps moving. It travels into the next room under the carpet, soaks the tack strip, and swells particleboard cabinet bases and laminate core. Each of those turns an extraction job into a replacement job.
A late start costs you days. Equipment that might have run two or three days after a fast extraction can run much longer when the water has had overnight to soak into the subfloor and wall bottoms. That means more noise, more power use, and more time before your floors are back in use.
A caller notices the dishwasher leaking and water seeping out from under the toe-kicks. The contractor pulls the toe-kick panels, extracts the cavity, scans the cabinet bases with a thermal camera, and sets up injection drying through small drilled holes so the cabinets can stay in place.
An overflowing tub sends water across the upstairs hall and into a bedroom. The contractor runs wand passes, then uses a weighted extraction tool to squeeze the pad. Because it is clean water caught fast, the pad is dried in place by floating the carpet with air movers.
An ice maker line leaks behind the refrigerator and the hardwood next to it begins to crown and cup. The contractor takes pin meter readings across the floor, lays drying mats over the wet boards, and runs suction with a dehumidifier to bring the wood back toward its normal moisture content.
A washer drain fails mid-cycle and soapy water runs into the next room's carpet. Because it is Category 2 water, the contractor extracts the carpet, pulls and bags the pad, applies an antimicrobial, and dries the carpet for relay over new pad.
These are typical situations callers describe to dispatch, not quotes from specific customers.
Many times, yes. The contractor checks the source, the time wet and the condition of the carpet backing before deciding.
A truck-mount pulls stronger suction and heat, so it removes more water per pass. Portables reach high floors and buildings where hoses cannot run from the truck.
Not always. Early cupping can relax as the boards dry, especially with drying mats and dehumidification started quickly.
Many cabinets are dried in place. Particleboard bases that have already swelled may need replacement later.
The longer water sits, the more materials it reaches and the dirtier it gets. Fast extraction keeps more of the job savable.
Yes. The contractor maps the moisture, then gives you a written scope and price before extraction begins.
Calls from Loris and the surrounding area go to independent extraction pros working close by.
Carpeted bedrooms, living rooms, hardwood kitchens and finished lower levels.
Upper-floor units where portable extractors and ceiling-leak calls are common.
Carpeted office suites, lobbies, hotel rooms and restaurant dining areas.
We connect you with a local extraction contractor in Loris, SC, day or night.
